1x Yeast Pack 1x Yeast Nutrient 1 x Activated carbon, you need to order 1 x Turboklar. The shortest definition would be: A yeast/nutrient mix designed to produce high and pure alcohol by fermentation from a sugar/water wash.
2 in stock
Diammonium Phosphate, powder for use in winemaking. This is the basic nitrogen source in nearly all wine yeast nutrients. It can be used by itself or to augment some of the more expensive complete nutrients. At certain stages of fermentation it will help inhibit formation of reduced sulfur compounds.
Saccharomyces Cerevisiae – For sweet white/blush and dessert wines. Produces high levels of desirable congeners during fermentation including aromatic thiols, imparting rich fruity aromatics, full body and ‘tropical’ flavor characteristics. CY17 is also noted for high glycerol formation, further enhancing sweetness.
This is a slow fermenter compared to all other strains in the Mangrove Jack’s range, typically taking up to 21 days to ferment table wines and up to 35 days for dessert wines. CY17 prefers a constant temperature in the 22 – 26ºC (72 -78ºF) range. Dropping the temperature below 15ºC (59ºF) two thirds of the way through fermentation will arrest fermentation making CY17 suitable for producing naturally sweet wines (both potassium sorbate and metabisulphite must be used to prevent re-fermentation).
CY17 is also excellent for sweet sparkling wines, but CL23 must be employed for the bottle fermentation stage.
Avoid free SO2 levels above 50 ppm and ensure pH above 3.2, CY17 is a delicate strain that must be treated with some respect. Pay particular attention to sterile winemaking conditions and a warm start to fermentation otherwise risk of bacterial contamination is increased. CY17 will happily ferment up to 15% abv. ethanol if such conditions are employed
Acid reducing strain excellent for fruity white & blush country wines especially where residual sugars are desired. MA33 has the ability to metabolize between 30 and 35% of malic acid making this strain the perfect choice for country fruits which are naturally high in acid. Reducing malic acid will soften the wine and give a vin nouveau character for early consumption with a balanced palate.
MA33 is also noted for its production of fruity esters and fusel oils conferring fresh fruity character to the wine. There is an increased chance of Malolactic fermentation by lactic acid bacteria following MA33 fermentation. MA33 is a killer-sensitive strain. It is a good fermenter between 18 and 27OC (64 -80OF), with a rapid onset to fermentation although can exhibit a slow late fermentation profile and may require aeration after 10 – 12 days. Will ferment up to 14% ABV. ethanol providing the pH is above 3.2
Ideal for crisp, fresh dry white/blush and all sparkling wines. Also the best strain for high alcohol tolerance. CL23 produces very low levels of fusel oils and other congener compounds during fermentation and so does not contribute much to wine flavour or aroma and can therefore be considered to be a particularly neutral / clean fermenter.
However CL23 does contribute significantly to the wines structure and ferments out sugars completely allowing for the driest of wines to be made. CL23 is noted for its robustness, being able to ferment to 18% ABV. Ethanol, tolerate high free SO2 and high levels of other stress factors such as organic acids, incorrect temperature and pH making CL23 the strain of choice for high alcohol wines or where uncertain recipes are employed and fermentation reliability is a key factor or where low temperature fermentation down to 80ºC (46ºF) is required.