Free postage on all orders over £95.
Coopers Beer Kits now in stock
View our latest Special Offers
5% Discount on orders over £150.00
£14.99
This is a locally produced and well engineered brass coupling with 50cm PVC food grade hose (6mm internal 9mm external)
It allows easy conversion from S30 to system or other gas systems, connector will fit on standard S30 valve without Pin breaker (the valve in the picture is not supplied, for illustration only)
40 in stock
The S30 conversion pack contains a high grade stainless steel pin for use with 8g CO2 bulbs, plus a small o-ring to fit inside the S30 valve. For conversion of an S30 valve, simply put the pin in and you have a 8g bulb version of the valve (use the S30 bulb holder for injecting the 8g bulbs).
The S30 valve always contains a small o-ring inside. The one in the conversion pack is there only in case you damage the original one when you change over and put the pin in. For inserting or removing the 8g pin, you need to first temporarily remove the small o-ring. That is best done with a small knife or a very small screwdriver.
Forty pint capacity barrel with a good sized neck which makes it easier to clean and re-use. A pressure valve is included with the barrel.. Height 46cm, width 35cm. Beer capacity 40 pints.
This is a new S30 Co2 gas bottle, you can return it to us for a refill, there is no return value for these bottles, only refill .
g0 to gas refill go tohttps://brewingathome.co.uk/product/hambleton-bard-s30-cylinder-refill/
Faulty Gas Bottles
Any faulty gas bottles are now returned to Hamstead Brewing who will inspect and test them, if they are found to be faulty, we will refund your money, if they can’t find any fault there will be no refund.
Please let the sales assistant know if you having trouble with you bottle and we will take your details and send them to Hamstead Brewing, we will sale you a full gas bottle and let you know of the outcome, this can take up to 6 weeks, we are bound to their findings.
Care of gas bottles
After each use dip valve into warm water to ensure the valve has fully closed or tap the end with a small metal tool and test before you put it away again.