|The new S30 valve for your keg comes in high grade stainless steel.
The S30 valve can be equipped with a small piercing pin if you want to use 8g CO2 bulbs (use the bulb holder below to screw these onto the valve). You can insert and remove the pin and easily switch between using S30 cylinders and 8g bulbs.
For convenience, the valve comes in two versions – either pre-equipped with a piercing pin for 8g bulbs, or plain for use with S30 cylinders. Whichever version you get, it is as simple as removing/inserting the pin to change version.
When you remove or insert the pin, you need to temporarily remove the small o-ring inside first (use a knife or small screwdriver – carefully).
for use with the following taps:
Quick Serve Plastic Tap
Quick Serve Plastic Tap and Back Nut
Drum Tap Plastic with Back Nut
Choose the type of pressure valve in accordance with your ability to purchase gas cylinders. If you have a local supplier of S30 gas, then choose these, if not, and you have to buy “Sparklets” type 8gm bulbs, then choose the pin valve type.Forty pint capacity barrel with a good sized neck which makes it easier to clean and re-use. A pressure valve is included with the barrel.. Height 46cm, width 35cm. Beer capacity 40 pints.
S30 stainless beer pump with tube and connector, fully portable, no need to fix it to a table, it is safely free standing, works best with the S30 keg .