The Alla wine pipette, or wine thief, is a useful glass tube that, once steralised, can be popped into your brew, and by simply placing your thumb over the end, you can pull off a good sample of the brew
The Easy-Siphon makes siphoning your liquids easy. Designed to start the flow of liquid simply by pulling the racking tube outwards, then depressing it back down into the siphon. The Easy-Siphon is made out of acrylic and includes a 60cm racking tube, and an anti-sediment Tip.
These superbly engineered counter top cappers are designed to seal beer bottles with 26mm diameter crown caps.
They are also supplied with a free crimping cup so that you can seal 29mm crown caps commonly used on the larger cider bottles. Simply unscrew the silver cup at the base of the coloured section (being careful not to dislodge the springs) and replace with the larger cup.
They are height adjustable so will accommodate from small to large beer bottles and if required can be bolted to the counter. Simply place the crown cap onto the magnet inside the crimping cup, place capper over the neck of the beer bottle and with one hand pull down on the lever. Very easy to use this will make bottling so easy! To release the sealed bottle simply pull the bottle towards you.
Recycle those old beer bottles and give your own brew a professional touch with this quality product.
With this very handy tool you can safely place shrink caps onto bottles in no time. Boil water, place the shrink cap onto the bottle and put the cap grip over the shrink cap. Immerse in the boiling water and the shrink cap will fit perfectly onto the bottle neck in just 3 seconds
These special bottles capsules will shrink by up to 30% and can be used to give a professional finish to a wide range of bottle sizes.
TO SHRINK THE CAPSULE Place it in position over the neck of the bottle and apply heat for 5-10 seconds by rotating the bottle neck in the steam from a kettle or hair dryer
Crown Capper for 26mm caps, made from a sturdy metal construction.
This Bottle Capper is perfect for fitting metal crown caps to both glass and PET plastic bottles. Their two handled/twin lever design makes them quick, easy and safe to use for easy fitting of 26mm crown caps
Please note, due to high cost of postage on these inexpensive glass items, and high risk of breakage in transit, maximum number of bottles per order is 36, and the order must contain other items so that the value of bottles is no more tan 1/3rd of the total order value.
If you require bottles on their own, please ring 01271 374123 and we will quote a price to cover postage.